As you already know, ping command is used to find out whether the peer host/gateway is reachable.
Note: It can give beep only from terminal number 1 through 7 and gnome-terminal ( It will not work in console ). Find out the IP address. You can identify the ip-address using the host name as shown below. $ ping -c 1 google.com PING google.com (74.125.67.100) 56(84) bytes of data. 64 bytes from gw-in-f100.google.com (74.125.67. Nov 29, 2006 The ping command is a very common method for troubleshooting the accessibility of devices. It uses a series of Internet Control Message Protocol (ICMP) Echo messages to determine: Whether a remote host is active or inactive. The round-trip delay in communicating with the host.
Thanks Ping Perfect!!! John S- Just can't say enough about the server services here, really new to the whole server running thing, but the support here is amazing. Would definitely recommend to anyone to use a Ping Perfect server. Thomas R First of all, the support team.
If you are thinking ping is such a simple command and why do I need 15 examples, you should read the rest of the article.
Ping command provides lot more options than what you might already know.
Ping Example 1. Increase or Decrease the Time Interval Between Packets
By default ping waits for 1 second before sending the next packet. Cv template download for word. You can increase or decrease this using option -i as shown below.
Increase Ping Time Interval
Example: Wait for 5 seconds before sending the next packet.
Decrease Ping Time Interval
Example: Wait 0.1 seconds before sending the next packet.
Note: Only super user can specify interval less than 0.2 seconds. If not, you'll get the following error message.
Ping Example 2. Check whether the local network interface is up and running
Before checking whether the peer machine is reachable, first check whether the local network network is up and running using any one of the following 3 methods.
Ping localhost using zero (0)
This is probably the easiest and simplest way to ping a local host
Ping localhost using name
Ping localhost using ip
To quit the ping command, send SIGINT signal by pressing CTRL+C. If you have not specified any option to make the ping to exit automatically, then you will be terminating using CTRL+C ( SIGINT ) which will show the statistics and then terminate the ping process. When everything is working properly, it should say ‘0% packet loss' Sound studio.
Ping Example 3. Send N packets and stop
Send N packets specified with -c option and then stop. This way the ping command can exit automatically instead of pressing CTRL+C to exit.
In the following example, ping command sends 5 packets, and waits for response from the destination host. Ping will exit after receiving the response or error.
Ping Example 4. Show Version and Exit
Display the current version of ping program using -V option.
Ping Example 5. Flood the network
Super users can send hundred or more packets per second using -f option. It prints a ‘.' when a packet is sent, and a backspace is printed when a packet is received.
As shown below, ping -f has sent more than 400,000 packets in few seconds.
Ping Example 6. Audible ping: Give beep when the peer is reachable
.jpg "Console")
This option is useful for sysadmin during troubleshooting. There is no need for you to look at the ping output after each and every change. You can continue working with your changes, and when the remote machine become reachable you'll hear the beep automatically.
Note: It can give beep only from terminal number 1 through 7 and gnome-terminal ( It will not work in console ).
Ping Example 7. Find out the IP address
You can identify the ip-address using the host name as shown below.
Ping Example 8. Print Only Ping Command Summary Statistics
As you already know, ping command is used to find out whether the peer host/gateway is reachable.
Note: It can give beep only from terminal number 1 through 7 and gnome-terminal ( It will not work in console ). Find out the IP address. You can identify the ip-address using the host name as shown below. $ ping -c 1 google.com PING google.com (74.125.67.100) 56(84) bytes of data. 64 bytes from gw-in-f100.google.com (74.125.67. Nov 29, 2006 The ping command is a very common method for troubleshooting the accessibility of devices. It uses a series of Internet Control Message Protocol (ICMP) Echo messages to determine: Whether a remote host is active or inactive. The round-trip delay in communicating with the host.
Thanks Ping Perfect!!! John S- Just can't say enough about the server services here, really new to the whole server running thing, but the support here is amazing. Would definitely recommend to anyone to use a Ping Perfect server. Thomas R First of all, the support team.
If you are thinking ping is such a simple command and why do I need 15 examples, you should read the rest of the article.
Ping command provides lot more options than what you might already know.
Ping Example 1. Increase or Decrease the Time Interval Between Packets
By default ping waits for 1 second before sending the next packet. Cv template download for word. You can increase or decrease this using option -i as shown below.
Increase Ping Time Interval
Example: Wait for 5 seconds before sending the next packet.
Decrease Ping Time Interval
Example: Wait 0.1 seconds before sending the next packet.
Note: Only super user can specify interval less than 0.2 seconds. If not, you'll get the following error message.
Ping Example 2. Check whether the local network interface is up and running
Before checking whether the peer machine is reachable, first check whether the local network network is up and running using any one of the following 3 methods.
Ping localhost using zero (0)
This is probably the easiest and simplest way to ping a local host
Ping localhost using name
Ping localhost using ip
To quit the ping command, send SIGINT signal by pressing CTRL+C. If you have not specified any option to make the ping to exit automatically, then you will be terminating using CTRL+C ( SIGINT ) which will show the statistics and then terminate the ping process. When everything is working properly, it should say ‘0% packet loss' Sound studio.
Ping Example 3. Send N packets and stop
Send N packets specified with -c option and then stop. This way the ping command can exit automatically instead of pressing CTRL+C to exit.
In the following example, ping command sends 5 packets, and waits for response from the destination host. Ping will exit after receiving the response or error.
Ping Example 4. Show Version and Exit
Display the current version of ping program using -V option.
Ping Example 5. Flood the network
Super users can send hundred or more packets per second using -f option. It prints a ‘.' when a packet is sent, and a backspace is printed when a packet is received.
As shown below, ping -f has sent more than 400,000 packets in few seconds.
Ping Example 6. Audible ping: Give beep when the peer is reachable
This option is useful for sysadmin during troubleshooting. There is no need for you to look at the ping output after each and every change. You can continue working with your changes, and when the remote machine become reachable you'll hear the beep automatically.
Note: It can give beep only from terminal number 1 through 7 and gnome-terminal ( It will not work in console ).
Ping Example 7. Find out the IP address
You can identify the ip-address using the host name as shown below.
Ping Example 8. Print Only Ping Command Summary Statistics
Use option -q to view only the ping statistics summary as shown below.
Ping Example 9. Change Ping Packet Size
You can change the packet size of ping command using -s option.
Example: Change the default packet size from 56 to 100.
Ping Packet Size
Wechselkurs dollar euro. In the above example, when we set the packet size to 100, it displays ‘128 bytes' in the output. This is because of the Ping packet header size, which is 28 bytes. So, if you specify the packet size as 100, 28 bytes for header will be added to it and 128 bytes will be sent.
Ping Bytes Sent = Ping Packet Size + Ping Header Packet Size (28 bytes)
Ping Example 10. Timeout -w
Ping -w option specifies the deadline to terminate the ping output. This specifies the total number of seconds the ping command should send packets to the remote host.
The following example will ping for 5 seconds. i.e ping command will exit after 5 seconds irrespective of how many packets are sent or received.
Note: When you specify both -w, and -c, whichever comes first will terminate the ping command.
Ping Example 11. Online ping
Ping from different locations and check the reachability (availability or time for reaching) of your server from different locations.
If you want to do an online ping, try just ping.
Ping Console Networking
Ping Example 12. Option -w or -c Exits Ping
Ping Example 13. Shorter statistics with SIGQUIT
While ping is printing the individual packet status, when you want to view the shorter statistics you can use this technique.
Pressing CTRL+| (Control key followed by pipe symbol) for the shows the summary in between, and continues with it packet sending and receiving process.
Csgo Ping Console Commands
Ping Example 14. Specify path for ping to send the packet
You can also specify through which path the ping should send the packet to destination.
Note: If one of the hop in the path is not reachable then you will have failure in pinging.
Ping Ps3 Games
Ping Example 15. Record and print route of how ECHO_REQUEST sent and ECHO_REPLY received
Ping Console Ubuntu
It records, and prints the network route through which the packet is sent and received. This is useful for network engineers who wish to know how the packet is sent and received.
